-107-
Text conversion
Connect the storage device in which the analyzer mea-
surement data is recorded to the PC.
Click the “
” button on the toolbar to open the text con
-
version window. Select the measurement data file (.DT)
you want to convert, convert it to text data or CSV format
data, and then use it with a text editor or spreadsheet soft-
ware on your PC.
ڦ
Measurement data text conversion format
One character of measurement data is converted into two lines of HEX (hexadecimal) line and character line
using a space of 4 characters.
◆
If the character code is undefined or “
△
” (space code), nothing is converted to the character line.
◆
If there is no data, “-” is converted to HEX line.
◆
Time information and line state of control line are converted as follows.
S
X
A
B
E
X
02
41
42
03
SX
A
B
EX
<Display>
<Converted>
HEX line
Character line
◆
If characters of the measured data have special attribute, symbols as shown below will be printed in the
character code printout line.
Line state H “11”
L “00”
H -> L “10”
L ->H “01”
Display
Meaning
?1
Parity error
?2
Framing error
?3
Parity&Framing error
?4
Overrun error
?5
Short frame
??
BCC/FCS(error)
｛｝
BCC/FCS(normal)
＾＾
Flag
BB
BB brake
AA
AA abort
##
MP bit
Display
Meaning
>>
Start sequence
>>
Stop sequence
##
ACKnowledge
=>
Transmission on the master
side (right)
<=
Reception on the master side
(lead)
a
ACKnowlege
n
Non ACKnowlege
Idle time
[IDLE]
[0020]
Time stamp
[TMSP]
3 units (hour, minute, second etc.)
［
051735]
Time stamp
[T
2314
］
5 units (day, hour, minute, second, 10ms etc.)
［
321257
］
