Linearsound LTS.PM62, Operation Manual

Page: 7 / 14

7
Operation attention
1. Dial REC message switch in rear panel to 1, 2, 3, which means 1, 2, 3 storage. Press
REC, the indicator will be active, input signal to MIC port, start record. Press stop, it will stop
record (it should be recorded mAX audio 1 minute for every storage. It can use the recorded
alarm message in N°3 storage)
2. Start play storage 1 or 2. Separately short circuit COM-NO1 / COM-NO2 of PLAY message,
simultaneously press PLAY, the indicator will be active, then start play, press STOP, then it
stops.
3. Press STOP, it can stop record / play. Choose MESSAGE 1 TIME / CONTINUOUS, which
means play record once / play continuously. Move switch REC message to off, then it can
not record.
Guidance of excluding errors
Mute function
Test 3 levels priority function :
1. Built in REC MSG (NO.1 and NO.2) priority : TUNER, CD, MP3.
2. Built in chime : REC MSG (NO.1 and NO.2) : TUNER, CD, MP3.
3. Paging MIC first priority than all other music sources.
Phenomena Cause
All the wires are connected well but no
voice output
1. No power or wrong plug connection.
2. Fuse is burned.
3. Volume is town off.
4. No input signal.
Power on but alarming signal
1. Overloading or short circuit.
2. Voltage is not stable, too high or low.
No voice output in
1. Machine is in protection condition in
case of high temperature.
2. Wrong wire connection.
Network connection line
5. OPERATION
6. CONNECTIONS