The Linear 2x2 Switcher for HDMI routes high definition video in multiple resolutions
up to 1080p plus multichannel digital audio from either one of two sources to the two
displays. Two outputs gives you the choice of sending high definition audio and video
signals to two displays simultaneously. A digital audio output port is available if you need
to direct the audio to an A/V receiver. The 2x2 Switcher for HDMI eliminates the need
to disconnect and reconnect sources to a display equipped with one input. It works with
Blu-ray and HD-DVD players, TiVo systems and satellite set top boxes that connect to
an HDMI display. By using the IR remote, either source is accessible at all times.
How It Works
You simply connect all your sources to the switcher’s HDMI inputs. Then connect up
to two displays on the switcher’s HDMI outputs. Once the sources, the Switcher and
the display(s) are powered and connected, you simply select which source you want
to view using the IR remote.
INTRODUCTION
1
READ THESE NOTES BEFORE INSTALLING OR
OPERATING THE 2X2 SWITCHER FOR HDMI
Display information (EDID) is sent from the display connected to HDMI
•
Output Port 1 to both of the sources connected to the 2X2 Switcher for
HDMI. If there is no display connected to HDMI Output Port 1, the EDID
from the display connected to HDMI Output Port 2 will be used. (See note
on page 4 for additional information)
The 2X2 Switcher for HDMI can only mirror one input video signal at a time to
•
both display outputs. The user can choose which of the two HDMI inputs will be
displayed on both HDMI outputs
HDMI/HDCP compliant
•
Compatible with all HDMI and DVI* displays
•
NOTE:
When used with a HDMI to DVI adapter.
OPERATION NOTES