Linear Tube Audio ZOTL10 Mk.II, User Manual, Page: 4 / 8

Quick Start
Remove amplifier, power supply, and included cables from the
box.
Attach the AC umbilical cable to the power supply and amplifier.
Be sure to tighten the cable’s locking connectors.
Check that the Stereo-Mono and Direct-W/Vol switches (see
Operating Modes for more information) on the back are in the
correct position for your setup, and that your interconnects and
speaker cables are hooked up to the appropriate connectors.
Only one source should be connected at a time.
Attach the power cable to the IEC connector on the power
supply, and plug into an outlet. Above the IEC outlet on the power
supply there is a window showing the selected AC input voltage.
Be sure that it is set correctly for your country’s voltage. If it does
not match, or if you would like to change it, contact us for
instruction.
Hook up your preamp (or other source) and speakers.
Once your system is set up and everything is plugged in, turn your
system on.