Z10e Electrostatic Ampli9ier User Guide
Speci2ications (Typical Performance Values):
Specifications (Typical Performance Values)
• Sensitivity: 1.2V RMS for 10 watts output
• Inputs – 2 Stereo Pairs Single Ended RCA, 1 Stereo Pair of 3 pin XLR balanced inputs
(true balanced)
• Outputs – One set of speaker outputs, two regular Headphone Outputs (1 watt and 3
watt), one Electrostatic Headphone Output
• Output impedance 1.7 ohms
• Input impedance: 50k
• 110V-120V / 220-240V operation: factory configured
• Hum and noise: 94dB below full output (measured at 20Hz-20kHz)
• Carrier: -50dB
• Power output with 4-ohm load: 13W, 0.5% THD
• Power output with 8-ohm load: 12W, 0.5% THD
• Frequency response (8-ohm load): 8Hz to 60kHz, +0, -.5dB
• Amplifier class: Push-pull Class AB
• Voltage gain (8-ohm load): 18dB
• Size: Amplifier: 12.75 inches (32.4 cm) wide, 6.25 inches (15.9 cm) tall, 14.5 inches
(36.9 cm) deep (including connectors). External Transformer: 4.75 inches wide (12.1cm),
4 inches tall (10.2mm), 7.5 inches (19mm) long.
• Net weight: Amplifier: 14 lbs. or 6.4 kg, External Transformer: 5 lbs. or 2.27 kg.
• Finish: Aluminum case
• Tube complement: two 12AT7s, two 12AU7s, and four EL-84s or equivalents
10
Linear Tube Audio
