Use Power Restart
Match
:
Switch off the power, then switch on power again, then repeat
the procedure again. After the second ON/OFF procedure
immediately short press on/off key (single zone remote) zone
key (multiple zone remote) 3 times on the remote. The light
blinks 3 times means match is successful.
Delete
:
Switch off the power, then switch on power again,
immediately short press on/off key 5 times on the remote.
The light blinks 5 times means all matched remotes were
deleted.
Use the controller’s Match key
Match
:
Short press match key, immediately press on/
off key (single zone remote) or zone key
(multiple zone remote) of the remote.
Delete
:
Press and hold match key for 5s to delete all
match, The light blinks 5 times means all
matched remotes were deleted.
R1-1 One-key RF Remote Controller
43.00 mm
17.00 mm
Safety information
1. Read all instructions carefully before you begin this installation.
2. When installing battery, pay attention to the battery positive and negative polarity. A
long time without the remote control, remove the battery.
When remote distance becomes smaller and insensitive, replace the battery.
3. If no response from the receiver, please re-match the remote.
4. Gently handle remote, beware of falling.
5. For indoor and dry location use only.
CR2032
Battery
Note: Before the first use,
please remove the protective film on the
battery.
LED indicator
Click to turn on/off,
Press and hold 1-6s to
increase/decrease brightness.
Back holder with magnet
Mechanical Structures and Installations
26.50 mm
To fix the remote, three options are offered for selection:
Option 1: stuck on any metal surfaces directly.
Option 2: fix it on the wall with two screws .
Option 3: adhere it to the wall with 3M paster.
Match Remote Control (two match ways)
User Manual Ver 1.0.4
www.iskydance.com
Page 2
114438 |
Sys-Pro SingleColor 1 zones remote control
round, white
114439 |
Sys-Pro SingleColor 1 Zones Remote Control
Round, Black
