6
dc2052af
DEMO MANUAL DC2052A
LTpowerPlay QUICK START PROCEDURE
The following procedure describes how to use LTpowerPlay
to monitor and change the settings of LTC3880 and
LTC3883.
1. Download and install the LTPowerPlay GUI:
http://linear.com/ltpowerplay
2. Launch the LTpowerPlay GUI.
a. The GUI should automatically identify the DC2052A.
The system tree on the left hand side should look
like this:
b. A green message box shows for a few seconds in the
lower left hand corner, confirming that the LTC3880
and the LTC3883 are communicating:
c. In the Toolbar, click the “R” (RAM to PC) icon to read
the RAM from the LTC3880 and the LTC3883. This
reads the configuration from the RAM of LTC3883
and loads it into the GUI.
d. If you want to change the output voltage to a differ-
ent value, like 1.5V. In the Config tab, type in 1.5 in
the VOUT_COMMAND box, like this:
