4
DC2277af
DEMO MANUAL DC2277A
‘System Tree’ View
‘Config’ View
‘Telemetry’ View
‘Idealized On/OFF Waveforms’ View
‘Chip Dashboard’
View
‘Quick Inspect’
View
‘Telemetry Plot’
View
Toolbar
Figure 4. LTpowerPlay Interface of Programming the LTC3886
Quick start proceDure
POWERING DOWN THE BOARD BETWEEN
PROGRAMMING OPERATIONS
Disconnect the USB cable from the DC1427A/DC1613A
before removing or inserting a LTC3886UKG into the
programming socket.
WHAT YOU CAN DO WITH THE DC2277A
1. Compare the contents of the EEPROM in the
LTC3886UKG against your project or hex file.
2. Reprogram the contents of the EEPROM in the
LTC3886UKG using your project or hex file.
3. Verify the EEPROM within the DC2277A contains the
factory defaults.
n
From the LTpowerPlay interface, load the factory
defaults project file. This file is located at:
C:\Program Files\Linear Technology\LTpowerPlay\
project files\ltc3886\datasheet_defaults.proj
n
Click the Verify button.
