3
dc1705cfb
DEMO MANUAL DC1705C
QUICK START PROCEDURE
The DC590 and PLLWizard application are required to
control the DC1705C through a personal computer (PC).
DC590 Configuration
The DC590’s QuikEval™ drivers must be installed before
the DC590 will be able to communicate with the LTC6946.
To configure the DC590, follow the procedure below, start-
ing with step 1. If you have already installed the DC590
software previously, skip to step 5.
Note:
Once the QuikEval software is installed, the applica-
tion does not need to be executed to run PLLWizard or to
control the DC1705C.
1. Do Not plug in the DC590 before running the installation
program.
2. Download the QuikEval installation program from
http://www.linear.com/software
.
3. Run the QuikEval installation program and follow the
on-screen instructions. More detailed installation infor-
mation may be found in the DC590’s Quick Start guide.
4. Exit the QuikEval program once the installation is com-
plete, as it is not needed to run the PLLWizard software.
5. Place the DC590 jumpers in the following positions:
JP4
EE Must be in the “EN” position.
JP5
ISO “ON” must be selected.
JP5
SW “ON” must be selected.
JP6
VCCIO “3.3V” must be selected. This sets the SPI
port to 3.3V operation.
6. Connect the DC590 to one of your computer’s USB
ports with the included USB cable.
Downloaded from
Downloaded from
Downloaded from