16
dc1540bf
DEMO MANUAL DC1540B
COMMON DEMO BOARD OPERATIONS
Figure 12. GUI Fault Sharing Setup Tool
Reset the LTC2977
To reset the LTC2977 and reload the EEPROM contents
into operating memory (RAM), press SW3.
DC1360B LEDs
The Red ALERTB LED indicates a fault has occurred. The
Green LED indicates the status of the PWRGD signal.
DC1361B Remote Sense
Remote sense Test Points are included for channels 1-7.
There is no remote sense for Channel 0.
Faulting an Output
Use a jumper wire or a coin to short any output. For an OV
fault, short a lower voltage to a higher one momentarily.
Fault Sharing Setup in GUI
Use the Fault Sharing Diagram Tool to setup the fault sharing
in the GUI. Before doing so, view the fault sharing Demo
in the GUI. Go to Tools > Fault Sharing Diagram.