8
Mode / channel
Function & effect
DMX value
DMX mode 5 - HSV mode
CH1
Hue - 256 colors
0 - 255
CH2
Saturation 0 ~ 100%
0 - 255
CH3
Value 0 ~ 100%
0 - 255
3. LED DISPLAY PANEL OPERATION
Special construction for DMX connection
• At last fixture, the DMX cable has to be terminated with a terminator to reduce signal,
errors. Solder a 120 ohm 1/4W resistor between pin 2 (DMX -) and pin 3 (DMX +) into a
3 pin XLR plug and plug it in the DMX output of the last fixture.
•
If the controller is 5 pin output, it is necessary to use an adapter to transfer signal from 5
pin output to 3 pin XLR plug or you can connect cables as following :
3 pin XLR : Pin 1 5 pin XLR pin 1
GND
3 pin XLR : Pin 2 5 pin XLR pin 2
Negative signal (-)
3 pin XLR : Pin 3 5 pin XLR pin 3
Positive signal (+)
5 pin XLR : Pin 4 & pin 5 not used
c. Master / slave operation
The fixture can be linked 26 pcs together to work in master / slave mode without any console.
The 1
st
machine will be set as master and others will work as slave unit at same effect.
a. Basic instruction
M
O
D
E
Menu :
Menu selection or return to previous menu.
Enter :
Confirm and quit out current function setting.
Up :
Press “Up” through the menu list to increase / change the value of the current function.
Down :
Press “Down” through the menu list to decrease / change the value of the current
function.
