F O R T H E L O V E O F M U S I C
™
LP100Z
©
OWNER'S MANUAL AND
INSTALLATION GUIDE
INTRODUCTION
You have purchased an amplifier that leads the way with sound quality, reliability,
and features. These high performance amplifiers deliver what you ask for:
smooth, effortless listening, or hard driving power to get you down the road.
LINEAR POWER™
has been a name recognized since
1975
as a product
delivering high quality and audio excellence. Now, you have the results of that
experience.
L
P100Z
©
features include: frequency programmable
high-pass
,
low-pass
, or
bypass
cross-over filter; high current, gold plated power connector, gold plated
5-way binding post
speaker connections, panel mount fuse, high quality
components, bass and treble controls (
Z models
only), and
LINEAR POWER™
reliability and commitment to excellence. Enjoy the Music!!
IMPORTANT NOTICE
The L
P100Z
©
is
NOT
2-ohm mono
stable. While it may be used in
2-ohm
stereo
, if you hook-up this amplifier in
2-ohm mono
it will
DAMAGE
the unit and
VOID
your warranty. For further information on this, or assistance to calculate
your total speaker load impedance, please call
T.I.P.S. Inc.
(see info under
Service or
R
epair
heading)
CONTROLS and CONNECTIONS
Please read through this entire section before installing your amplifier in the
vehicle. Disconnect the negative (
-
) battery terminal in your vehicle and remove
the fuse from the amplifier before making or breaking any connections. Do not
install power line fuse at battery or amp until the installation of your amplifier is
complete.
1.
Input connections:
Connect with quality RCA patch cords from the head unit,
preamplifier, crossover, or any other sound processor.
© 2008 Linear Power, Inc. - ALL RIGHTS RESERVED
LINEAR POWER
™
is a trademark of Linear Power, Inc.
1
