machine start working, and outlet mist become warm, press this key again to stop warm
mist function, When the warm mist function is off, the machine only works with cool mist .
Humidistat
：
Press this key to set the desirable humidity; Machine will stop
working once humidity reached setting humidity. Humidity can be adjusted from 40%
～
80%RH. When machine start working, it will keep humidifying for 2 minutes no matter the
room humidity reach the setting humidity or not.
AUTO mode
：
Long Press this button for 3 seconds, the machine enter an
automatic control mode. This model maintains the relative humidity at 55%~68%. Machine
will choose the best humidifying method according to different room ambient humidity.
Mist Level
：
Steam volume can be changed amount 1 estate, 2 estates, and 3
estate by pressing this key . Smallest steam for 1 estate, biggest steam for 3 estates
★
Operation procedure
(1) Get the water tank out of the machine, unscrew the lid and fill the tank with water,
then screw the lid well. Put the water tank on the machine bodysteadily.
(2) Inspect whether the mist outlet nozzle and handle cover are assembled well on the
water tank.
(3) Plug in the power, and then press the on/off switch, the machine starts to work.
(4) Follow below steps to use aroma function:
a.
Take out aroma box
b.
Use water-soluble aroma oil to drop into the sponge
c.
Put the aroma box back into the machine, the aroma function will be on automatically
when turn on the machine
d.
To stop the aroma function or when the machine is not in use for a long time, take out
the sponge in the aroma box and clear it, put it back to the machine.
Ⅵ
.Cleanness & Maintenance
●
Before cleaning, turn the functional knob point to “ OFF”, take off the plug
1) Transducer
●
The water quality in someplace is too hard so that the transducer surface will be easy to
scale formation, The users need to clean transducer with cleaning agent .
●
Add little cleaning agent on the transducer surface ( More or less depends on the scale ),
then infuse water into the sink to soak the sink fully for 10-15 min.
●
Clean with brush until scale disappear.
●
Clean twice with water
☆
Don
’
t clean transducer by any metal or stiffness material or scrape it to avoid any
damage
2) Water tank inside
●
Clean water tank inside and water sink twice per week at least when use machine
frequently
●
Use soft cloth wipe it when water tank side has scale
●
There will be some dirt stick to the tank inside wall, which can be cleaned with soft
scour, Clear the scour completely
●
Don't put acid, alkalescency, blencher scour into water tank to avoid damage
3) Water sink inside
●
Take out the water in sink, Clean the scale by brush, then wiped by damp cloth
●
Flush it by water
4) Air filter
It is recommend to replace the air filter every half year to one year depens on the actual
environmental conditions. Press the air filter cover, the cover will pop out ,take out the air
filter and replace the new one . Please wrap the old filter properly to avoid secondary
pollution.
VII. Safety Items
*Check the voltage carefully to ensure your home power voltage fits the product
*Ensure the plug exactly inserts to the right socket, and only for the plug without others,
Make sure well contact.
*Take out the plug with hand instead of dragging the wire.
*Don’t use the product in wet environment, such as bathhouse and bathroom, it will cause
electric shock and fire.
*Don’t put your hand and appliances on the product to avoid purl or damaging.
*Don’t clean your machine during working or just after working time to avoid hot water or
parts to hurt you.
*Remove the water tank before move the device.
*Don’t use the machine exploring to sunshine or closing to heater
*Please use the wire bought from seller service centre to replace the damaged wire.
