21
DO9215AV
www.domo-elektro.be
EN
PRECAUTIONS FOR USE
Be careful while handling the diffuser, the ceramic cover is fragile and is not attached to the plastic base.
It is therefore necessary to hold the plastic base with one hand and to keep the ceramic cover in the other.
A detailed diagram of the components is available on the last page.
1.
Insert the adaptor’s connector into the DC jack input under the base of the diffuser.
2.
Place the diffuser on a flat and stable surface and away from the edge.
3.
Remove the diffuser’s ceramic cover.
4.
Pour mineral water (bottled or tap water) into the water tank up to the maximum level indicated (200 ml).
5.
Then add a few drops of essential oils (2-5 drops) or home fragrances (3-7 drops) to the water tank.
6.
Carefully replace the ceramic cover
on the diffuser’s base. Be careful when handling, the ceramic cover is just
placed on the plastic base, it is not attached.
7.
Plug the adaptor into the outlet.
MAINTENANCE
You are advised to change frequently the water in the tank and clean the diffuser once or twice a week, particularly if you
want to change the fragrance to be diffused.
1.
Turn the appliance off and unplug it.
2.
Remove the cover and pour the water into the tank. Empty the water in the opposite way to the air outlet, do not
empty the water in the air outlet, this would damage the diffuser.
3.
Clean the inside of the diffuser with a soft damp cloth and a little water. If needed, use a little white vinegar strongly
diluted. Do not use corrosive detergents. Carefully rub the ceramic disc with a cotton bud being careful about not to
scratch it.
1.
4.
2.
5.
3./6.
7.
OK
USE
This diffuser has two function buttons on the front side:
ON-/OFF BUTTON
1.
Press once this button to turn on the aroma diffuser.
2.
Press a second time to start the diffusion for 60 minutes and then OFF.
3.
Press a third time for an intermittent diffusion – 30 sec ON / 30 sec OFF – for 120 minutes and then
OFF.
4.
Press a fourth time to switch the diffuser OFF.
BUTTON FOR LED LIGHT
1.
Press once this button to turn on the light, the colour will change automatically.
2.
Press a second time this button to fix the colour of the light.
3.
Press a third time to turn off the light.
Remark: when the water level in the tank is too low or at zero, the diffuser stops automatically.
CLEANING AND MAINTENANCE
You are advised to change frequently the water in the tank and clean the diffuser once or twice a week,
particularly if you want to change the fragrance to be diffused.
1.
Turn the appliance off and unplug it.
2.
Remove the covers and pour the water into the tank. Empty the water in the opposite way to the air
outlet, do not empty the water in the air outlet, this would damage the diffuser.
3.
Clean the inside of the diffuser with a soft damp cloth and a little water. If needed, use a little white
vinegar strongly diluted. Do not use corrosive detergents. Carefully rub the ceramic disc with a
cotton bud being careful about not to scratch it.
