39
DO91126
www.domo-elektro.be
EN
· Remove the 2 screws on the back of the top cover (1).
· Remove the top cover.
· Unscrew the upper hinge (2).
· Lift the door (3) and place it on a padded surface to prevent it from being
scratched.
· Remove the hinge pin from the plate and turn it 180°. Remount the pin in
the hinge so that it protrudes downwards when the hinge is turned.
· Move the cover caps from one side to the other.
· Remove the hinge pin and bottom hinge (4) by unscrewing the screws. Remove the foot (5) from the
left side.
· Remove the hinge pin from the plate and turn it 180°. Remount the pin in the hinge so that it
protrudes upwards when the hinge is turned.
· Reassemble the lower hinge (4) on the left side of the appliance by refitting the screws and reassemble
the foot on the right side.
Reverse Door
Tool required:
Philips screwdriver, Flat bladed screwdriver, Hexagonal spanner.
Ensure the unit is unplugged and empty.
To take the door off, it is necessary to tilt the unit backwards. You should rest the unit on something solid
so that it will not slip during the door reversing process.
All parts removed must be saved to do the reinstallation of the door.
Do not lay the unit flat as this may damage the coolant system.
It
'
s
better
that
2
people
handle
the
unit
during
assembly
.
1. Remove two screws at rear side of top cover.
2. Remove top cover and thermostat knob, then place it aside.
3. Unscrew top hinge and then remove door and place it on a soft pad to
avoid scratch.
4. Unscrew bottom hinge. Then remove the adjustable feet from both
side.
7
unscrew
