DO9099W
37
confirm the gender.
4. once you confirmed the gender, the height will start blinking.
adjust the height by using the up and down arrows. press the
set button to confirm the height.
5. once you confirmed the height, the age will start blinking.
adjust the age by using the up and down arrows. press the set
button to confirm the age.
6. at this point the number 1 will start blinking again. if you
would like to set several users, press the down arrow to set the next user. repeat
the steps above. if you are done setting the users, briefly stand on the scale to
select the desired memory. you can now start the measurements.
Note
: the scopes for the settings of gender, height and age are:
memory:
1-12
gender:
male / female
Height:
100cm – 250cm
Age:
10 - 100
