DO9061J
34
8. Place a measuring cup underneath the pulp spout and place a measuring cup
underneath the juice spout. The appliance is now ready for use.
Repeat these steps in reversed order when you disassemble the juicer.
USE
1. The on/off switch has 3 positions:
• On: ON
• Off: O
• Reversed direction: REV
2. Make sure that the juicer is switched off (O) and plug in the juicer.
3. Place the 2 measuring cups underneath the 2 spouts.
4. Wash the fruit and vegetables and cut them into pieces.
Caution
:
• Remove hard seeds and stones before extracting juice, otherwhise the
screw press could get damaged.
• It is not recommended to use coconuts or other hard foods in this
appliance. These could damage the motor.
• It is not recommended to use hard fruits or hard vegetables rich in fibres
and starch in this appliance. (for example sugar cane)
• The peel and seeds should be removed from oranges, lemons, grapefruit
and melons before use.
5. Turn on the on/off switch.
6. Put the vegetables and/or fruit pieces into the opening at the top of the lid. Push
the food further down, into the bowl, with the food pusher.
Caution
:
• Do not put any fingers or other strange objects into the opening of the
lid while the appliance is switched on. Only use the food pusher, do not
use spoons, forks, sticks,...
• Never operate the appliance with an empty bowl.
Tip
: Start with the harder fruits and pieces, only then extract from the soft fruits.
7. If the appliance gets obstructed during use, press the on/off switch into the ‘rev’
position and hold down to let the juicer turn in the opposite direction. This could
remove the obstruction. Release the switch to stop the reversed turning of the
screw press. If this does not work, then switch off the appliance, unplug and
reassemble the juicer according to the instructions. Then try to switch on the
