22
DO7319R
EN
ASSEMBLY
1. Place a bracket on the exterior side of the heating element and
fasten the swivelling wheels to the bracket with the wingnuts.
2. This also applies for the other side.
3. Place a bracket on the exterior side of the heating element and
fasten the swivelling wheels to the bracket with the wingnuts.
4. This also applies for the other side.
5. Turn the appliance upright, with the wheels underneath.
USE
· Set the temperature button to MIN and the power button to 0. Put the plug in the socket.
· Turn the buttons to the required position. A red indicator light indicates that the appliance
is heating. If the indicator light flashes, turn the appliance off. This is a warning that it is
overheating. Make sure that the appliance is not covered, and that there is enough free
space around it for ventilation.
Temperature button
· Use this button to control the temperature. When set to MIN, the
appliance is off.
· Turn the button towards MAX. The further you turn the button, the
hotter the oil radiator.
· If you set the knob to the MAX position, when the desired temperature
has been reached, the knob can be turned down to MIN. Stop turning
when the light goes out. The room will then be maintained at this temperature.
Power button
· You can use the power button to select between three different
settings: 1 (800 W), 2 (1200 W), 3 (2000 W).
· Position 3 will heat the area more quickly than position 1.
· Switch the appliance off by setting the temperature button to MIN
and the power button to 0. Remove the plug from the socket.
Fan function (500 W)
· Turn the fan on with the on/off switch. In this way, the appliance works as a hot air fan. It is
not necessary to set the temperature or the power level for this.
· If you use the oil radiator, the fan can also be turned on to heat the room more quickly.
