27
DO7292S
www.domo-elektro.be
EN
ACCESSORIES
1.
Crevice nozzle: for hard to reach areas like radiators, crevices,
corners, in between pillows,...
2.
Furniture nozzle: for easy, quick and thorough cleaning of
upholstered furniture
3.
Floor brush: for vacuuming hard flooring
USE
1.
Unwind the cord to a substantial length and plug in the vacuum cleaner. The yellow label on the cord
indicates the maximum length of the cord, that should not be exceeded.
2.
To turn the vacuum cleaner on and off, press the foot pedal with the
symbol.
3.
The suction can be controlled using the valve on the handle of the hose and the suction power
regulator. The vacuum has a suction power of 23 kpA, which means that the appliance has very
strong suction power. This could cause the end of the floor nozzle to become attached to the floor. If
you want to reduce the suction force, you can slide open the valve on the handle of the hose.
· Carpets: ensure that the switch on the floor nozzle is set to
(A).
· Hard floors: ensure that the switch on the floor nozzle is set to
(B).
4.
When you have finished vacuuming, unplug the vacuum cleaner and automatically rewind the cord
by pressing the foot pedal with the
symbol. Make sure that the plug does not whip back and
forth while rewinding the cord, by guiding the cord with your hand. This to prevent possible damage.
A
B
2
3
4
CLEANING AND MAINTENANCE
EMPTYING AND CLEANING THE DUST RESERVOIR
Empty the dust reservoir regularly. Make sure that the dust in the dust reservoir does not exceed the
maximum level.
1.
Hold the handle of the dust container and slide the button for removing the dust container to the
side (A). Carefully remove the dust container from the vacuum cleaner with an upward movement
(B).
2.
Push the lid of the dust container up and tip the dust into a dustbin.
3.
If necessary, wipe the dust reservoir clean with a soft, damp cloth.
4.
Replace the dust container in the vacuum before using the vacuum again.
2
1
A
B
2
3
1
