Linea 2000 DOMO DO719BL, Instruction Booklet, Page: 32 / 64

32
DO719BL
EN
CLEANING AND MAINTENANCE
· Do not place the appliance in the dishwasher.
· Remove the lid and clean with a damp cloth.
· Be careful when cleaning the blade.
· Fill the jug with warm water and a little bit of soap. Clean your appliance with the blend function (see
the section on use). Clean the inside of the jug with a soft sponge. Do not use a scouring pad as this will
scratch the base.
· After cleaning, dry all parts thoroughly.
· Do not immerse the appliance in water.
PROBLEMS AND SOLUTIONS
Problem Causse Solution
The lights on the display
are off There is a problem with the
connection Check if the power cord is properly
connected
There are too many ingredients
in the jug, the lid is not in place Remove some of the ingredients.
Ensure the lid is in place
The light of the chosen
setting is on, but the
appliance doesn’t work You didn’t confirm the setting
with the start button Press the start button
The appliance stops
working There is not enough liquid in
the jug The appliance has a boil dry
protection. The appliance will shut
down when there is not enough liquid
used
You can hear several beeps
and the light of the chosen
program blinks There is too much liquid in the
appliance The appliance has sensor to make
sure it doesn’t overflow. Pour some of
the liquid from the jug.
The overfill sensor is dirty Clean the sensor with a damp cloth
The food is burned The jug wasn’t filled between
the min and max indication
lines. Ensure the base is always covered
with liquid, between the min and max
indication.
FREQUENTLY ASKED QUESTIONS
Can I make cold soups like Gazpacho in my soup maker?
Yes. First cook the soup using the chunky or smooth setting. Then simply let the soup cool or refrigerate.
The soup maker stops working
The appliance has a safety thermostat. When the appliance is overheated it stops working. This can
happen when you use the soup maker multiple times in a row. If this problem occurs, remove the food and
allow the appliance to cool for half an hour. It should now work correctly.
If the blend function is used continuously for more than 20 sec., the safety will turn off the appliance.
When this happens wait for 10 seconds before reusing the blend function.