DO7037
28
PARTS
1. Adjustable blades
2. Lever for adjusting the blades
3. On/off button
4. Cord
5. Oil bottle
6. Protection cap
7. Comb attachment 3 mm
8. Comb attachment 6 mm
9. Comb attachment 9 mm
10. Comb attachment 13 mm
11. Cleaning brush
USE
1. Check the hair clipper and the cord for possible damage before using the
appliance. Do not use the hair clipper when the appliance or the cord is damaged.
2. Make sure that the on/off button is switched off.
3. Unwind the cord and insert the plug into the power
outlet.
4. Never use the appliance with wet hands.
5. Make sure that the hair to be trimmed is dry and clean.
6. Click the comb attachment of choice onto the shaver
head. Make sure that the comb attachment is properly
clicked into place before starting to shave.
7. Switch on the hair clipper by sliding the on/off button
to the on position (1).
8. Tip: Start by shaving a small piece to get used to the
comb attachment.
9. Start with the comb attachment for long hair. Then use shorter combs if necessary.
10. Shave slowly and against the hair growth direction.
11. Make sure that the comb attachment is as flat as possible during shaving.
12. Use the adjusting lever for more flexibility, so you can gradually trim the hair
without changing the comb attachment.
13. Use the hair clipper without comb attachment for fine and detailled trimming.
14. Immediately switch off the hair clipper after use by sliding the on/off button to the
off position.
1
2
3
4
5
6
9
8
10
7
11
ON
OFF
Summary of Contents for DOMO DO7037
Page 39: ......
