28
DO607ED
EN
1. Body
2. Feet
3. Body & feet
The feet are at a greater distance from the heart and are
therefore often colder. The foot zone of the electric blanket
is always 5°C warmer than the body zone.
TEMP
The temperature can be set with the TEMP button. A selection can be made from eight
different temperature settings that vary from 20 °C to 50 °C.
· Press the TEMP button. The temperature indicator on the display will begin to flash.
· Press + or - to raise or lower the temperature.
New blenket item develop plan
3 page of 4 pages
5. Function and operation
5.1 Turn on :
Press ON/OFF button to turn on machine
,
machine will open LCD backlight,and LCD display all
icon 1 S, then into "Body and feet heating mode".
5.2 Select mode :
During "Body and feet mode", use "Mode" button to select three mode:"Body mode", "Feet mode" and
"Body and feet mode"
5.3 Select setting:
press "TEMP" "5" setting blink
In any turn on condition, press【TEMP】Button，the temperature icon will blink，then
press【+】button，heating setting will increase, the highest is 8; press【-】button
will decline Temperature setting until reach 0, 0 setting does't heating , LCD
display "Stand BY".
Body mode
Feet mode
Body and feet mode
press "+" incease settings
press "-"
decline settings
New blenket item develop plan
3 page of 4 pages
5. Function and operation
5.1 Turn on :
Press ON/OFF button to turn on machine
,
machine will open LCD backlight,and LCD display all
icon 1 S, then into "Body and feet heating mode".
5.2 Select mode :
During "Body and feet mode", use "Mode" button to select three mode:"Body mode", "Feet mode" and
"Body and feet mode"
5.3 Select setting:
press "TEMP" "5" setting blink
In any turn on condition, press【TEMP】Button，the temperature icon will blink，then
press【+】button，heating setting will increase, the highest is 8; press【-】button
will decline Temperature setting until reach 0, 0 setting does't heating , LCD
display "Stand BY".
Body mode
Feet mode
Body and feet mode
press "+" incease settings
press "-"
decline settings
New blenket item develop plan
- -
4
2
page of
4
pages
3. Control panel looks
4.
Switch and button define and function
【
ON/OFF
】
Button:For comply energe standard, use mechanical switch.Turn off machine, the ratting is 0
W,turn on machine then LCD display all icon 1 s, CUP check itselft.If all fuction is ok,machine will automatic
work with 5 heating setting and fixed time 8 hours
【MODE
】
Button:Set function mode-body heatingn mode
；
feet heating mode
，
body and feet mode
【
QUICK
】
Button:Press it into quick heating function, machine will work with 8 heating setting and
30 minutes and then automaticly back to the initail setting
【
TEMP
】
Button: press it then press
【
+
】
and
【
-
】
could set heatting setting.
【
TIMER
】
Button: press it then press
【
+
】
and
【
-
】
set heating setting
【
+
】
Button: press it to increase temperature.
【
-
】
Button: press it to decline time
· If no button is pressed, the selected temperature will flash and the blanket will heat to this
temperature.
· If the temperature setting is at 0, the blanket will not heat.
QUICK
The QUICK button will heat the blanket to the hottest position (position 8)
for 30 minutes. It is possible to press this button at any time if the blanket is
turned on. The selected MODE will not change. Once the 30 minutes have
elapsed, it will revert to the previous setting.
TIMER
If no timer has been set, the blanket will continue to heat until you turn it off. A maximum
time period of 12 hours can be set with the TIMER button. After this time has elapsed, the
blanket will turn off automatically.
· Press the TIMER button. The minutes on the display will begin to flash. Press + or - to adjust
the minutes. If no button is pressed, the selected time will flash.
· If the + button is held pressed, the hours will also increase, but the hours can be set
separately as well. Press the TIMER button once again. The hours on the display will begin
to flash. Press + or - to adjust the hours. If no button is pressed, the selected time will flash.
New blenket item develop plan
4 page of 4
pages
5.4
Selection time
In any turn on condition, press
【
TIMER
】
button
，
the time icon will blink
（
fist set hour
，
then
set minute
）
then press
【
+
】
button
，
increase time until the longest time-12 hours;
press
【
-
】
button, time will decline until 0 minute. 0 minute mean machine is non-fixed time
Press "TIMER" time icon blink
press "+"increase time
press “ - " decline time
5.5 Quick heating function
In any turn on condition，press
【QUICK】
button，machine into "quick heating mode" works
with 8 heating setting and 30 minutes, in time will back to initial setting
.
5.6 In any turn on condition
，
when key part is broken, CPU will
exzmine
the reason,the machine
display error info on LCD and open backlight, meantime all button are no function.Thyristor close
output(Switch short circuit will output) blanket off power.
New blenket item develop plan
4 page of 4
pages
5.4
Selection time
In any turn on condition, press
【
TIMER
】
button
，
the time icon will blink
（
fist set hour
，
then
set minute
）
then press
【
+
】
button
，
increase time until the longest time-12 hours;
press
【
-
】
button, time will decline until 0 minute. 0 minute mean machine is non-fixed time
Press "TIMER" time icon blink
press "+"increase time
press “ - " decline time
5.5 Quick heating function
In any turn on condition，press
【QUICK】
button，machine into "quick heating mode" works
with 8 heating setting and 30 minutes, in time will back to initial setting
.
5.6 In any turn on condition
，
when key part is broken, CPU will
exzmine
the reason,the machine
display error info on LCD and open backlight, meantime all button are no function.Thyristor close
output(Switch short circuit will output) blanket off power.
New blenket item develop plan
- -
4
2
page of
4
pages
3. Control panel looks
4.
Switch and button define and function
【
ON/OFF
】
Button:For comply energe standard, use mechanical switch.Turn off machine, the ratting is 0
W,turn on machine then LCD display all icon 1 s, CUP check itselft.If all fuction is ok,machine will automatic
work with 5 heating setting and fixed time 8 hours
【MODE
】
Button:Set function mode-body heatingn mode
；
feet heating mode
，
body and feet mode
【
QUICK
】
Button:Press it into quick heating function, machine will work with 8 heating setting and
30 minutes and then automaticly back to the initail setting
【
TEMP
】
Button: press it then press
【
+
】
and
【
-
】
could set heatting setting.
【
TIMER
】
Button: press it then press
【
+
】
and
【
-
】
set heating setting
【
+
】
Button: press it to increase temperature.
【
-
】
Button: press it to decline time
· Once the selected time has been set, the blanket will heat for that period of time. The
remaining time can be read on the display. It will count down.
New blenket item develop plan
4 page of 4
pages
5.4
Selection time
In any turn on condition, press
【
TIMER
】
button
，
the time icon will blink
（
fist set hour
，
then
set minute
）
then press
【
+
】
button
，
increase time until the longest time-12 hours;
press
【
-
】
button, time will decline until 0 minute. 0 minute mean machine is non-fixed time
Press "TIMER" time icon blink
press "+"increase time
press “ - " decline time
5.5 Quick heating function
In any turn on condition，press
【QUICK】
button，machine into "quick heating mode" works
with 8 heating setting and 30 minutes, in time will back to initial setting
.
5.6 In any turn on condition
，
when key part is broken, CPU will
exzmine
the reason,the machine
display error info on LCD and open backlight, meantime all button are no function.Thyristor close
output(Switch short circuit will output) blanket off power.
New blenket item develop plan
3 page of 4 pages
5. Function and operation
5.1 Turn on :
Press ON/OFF button to turn on machine
,
machine will open LCD backlight,and LCD display all
icon 1 S, then into "Body and feet heating mode".
5.2 Select mode :
During "Body and feet mode", use "Mode" button to select three mode:"Body mode", "Feet mode" and
"Body and feet mode"
5.3 Select setting:
press "TEMP" "5" setting blink
In any turn on condition, press【TEMP】Button，the temperature icon will blink，then
press【+】button，heating setting will increase, the highest is 8; press【-】button
will decline Temperature setting until reach 0, 0 setting does't heating , LCD
display "Stand BY".
Body mode
Feet mode
Body and feet mode
press "+" incease settings
press "-"
decline settings
New blenket item develop plan
3 page of 4 pages
5. Function and operation
5.1 Turn on :
Press ON/OFF button to turn on machine
,
machine will open LCD backlight,and LCD display all
icon 1 S, then into "Body and feet heating mode".
5.2 Select mode :
During "Body and feet mode", use "Mode" button to select three mode:"Body mode", "Feet mode" and
"Body and feet mode"
5.3 Select setting:
press "TEMP" "5" setting blink
In any turn on condition, press【TEMP】Button，the temperature icon will blink，then
press【+】button，heating setting will increase, the highest is 8; press【-】button
will decline Temperature setting until reach 0, 0 setting does't heating , LCD
display "Stand BY".
Body mode
Feet mode
Body and feet mode
press "+" incease settings
press "-"
decline settings
New blenket item develop plan
3 page of 4 pages
5. Function and operation
5.1 Turn on :
Press ON/OFF button to turn on machine
,
machine will open LCD backlight,and LCD display all
icon 1 S, then into "Body and feet heating mode".
5.2 Select mode :
During "Body and feet mode", use "Mode" button to select three mode:"Body mode", "Feet mode" and
"Body and feet mode"
5.3 Select setting:
press "TEMP" "5" setting blink
In any turn on condition, press【TEMP】Button，the temperature icon will blink，then
press【+】button，heating setting will increase, the highest is 8; press【-】button
will decline Temperature setting until reach 0, 0 setting does't heating , LCD
display "Stand BY".
Body mode
Feet mode
Body and feet mode
press "+" incease settings
press "-"
decline settings
1
2
3
