45
DO1070DV
www.domo-elektro.be
ES
· La clase de clima indica la temperatura ambiente mínima y máxima para el correcto funcionamiento
de un dispositivo. Puede encontrar la clase de clima en la placa de características presente en la parte
posterior del aparato.
· SN: Subnormal: temperatura ambiente de 10 °C a 32 °C
· N: Normal: temperatura ambiente de 16 °C a 32 °C
· ST: Subtropical: temperatura ambiente de 16 °C a 38 °C
· T: Tropical: temperatura ambiente de 16 °C a 43 °C
CAMBIO DE DIRECCIÓN DE LA PUERTA
El congelador tiene una puerta reversible. Si quiere trasladar las bisagras de la puerta hacia el otro lado,
le recomendamos que se ponga en contacto con un taller de reparación autorizado para llevar a cabo el
trabajo. Antes de cambiar la dirección de giro, compruebe que el enchufe se ha desconectado de la toma
de corriente y que el aparato está vacío.
1.
Retire los tornillos de la parte posterior de la cubierta superior.
Reverse Door
Tool required:
Philips screwdriver, Flat bladed screwdriver, Hexagonal spanner.
Ensure the unit is unplugged and empty.
To take the door off, it is necessary to tilt the unit backwards. You should rest the unit on something solid
so that it will not slip during the door reversing process.
All parts removed must be saved to do the reinstallation of the door.
Do not lay the unit flat as this may damage the coolant system.
It
'
s
better
that
2
people
handle
the
unit
during
assembly
.
1. Remove two screws at rear side of top cover.
2. Remove top cover and thermostat knob, then place it aside.
3. Unscrew top hinge and then remove door and place it on a soft pad to
avoid scratch.
4. Unscrew bottom hinge. Then remove the adjustable feet from both
side.
7
unscrew
2.
Retire la tapa superior del congelador.
Reverse Door
Tool required:
Philips screwdriver, Flat bladed screwdriver, Hexagonal spanner.
Ensure the unit is unplugged and empty.
To take the door off, it is necessary to tilt the unit backwards. You should rest the unit on something solid
so that it will not slip during the door reversing process.
All parts removed must be saved to do the reinstallation of the door.
Do not lay the unit flat as this may damage the coolant system.
It
'
s
better
that
2
people
handle
the
unit
during
assembly
.
1. Remove two screws at rear side of top cover.
2. Remove top cover and thermostat knob, then place it aside.
3. Unscrew top hinge and then remove door and place it on a soft pad to
avoid scratch.
4. Unscrew bottom hinge. Then remove the adjustable feet from both
side.
7
unscrew
3.
Retire los tornillos y, a continuación, retire la bisagra superior que mantiene la puerta en su lugar.
Levante la puerta y colóquela sobre una superficie suave para evitar arañazos.
Reverse Door
Tool required:
Philips screwdriver, Flat bladed screwdriver, Hexagonal spanner.
Ensure the unit is unplugged and empty.
To take the door off, it is necessary to tilt the unit backwards. You should rest the unit on something solid
so that it will not slip during the door reversing process.
All parts removed must be saved to do the reinstallation of the door.
Do not lay the unit flat as this may damage the coolant system.
It
'
s
better
that
2
people
handle
the
unit
during
assembly
.
1. Remove two screws at rear side of top cover.
2. Remove top cover and thermostat knob, then place it aside.
3. Unscrew top hinge and then remove door and place it on a soft pad to
avoid scratch.
4. Unscrew bottom hinge. Then remove the adjustable feet from both
side.
7
unscrew
Summary of Contents for Domo DO1070DV
Page 78: ...78 DO1070DV SK...
