PROLINE B-3650
the bread to rise. At normal temperature you should use tepid water to make bread:
cold water will not activate the yeast and warm water will achieve the opposite result.
Milk
Milk adds greatly to the colour of the bread (brown for the crust, creamy on the inside), improves
the overall taste of the bread and increases its nutritional value. Should you choose to use fresh milk,
do not forget to reduce the amount of water, in order to maintain the right level of humidity.
CAREFUL:
do not use fresh milk if you are going to choose the baking program with the time
delay function, for the milk could turn sour.
Other ingredients
In some cookery books you may come across recipes requiring the use of herbs, nuts, currants, fruit
or vegetables. Always use fresh ingredients. When you want to use nuts, sunflower seeds, dried fruit or
similar ingredients, we recommend that they be soaked in water and dried before adding them to the
dough. Always ensure these ingredients are not too large, for they may damage the non-stick coating.
DISPLAY
“Select” button
This button is used to select the desired baking program. With every touch of this button, you will
hear a bleeping signal, thus indicating a change in the selected type. You can see which program
you select on the display. This bread maker allows you to choose from 11 different types of baking
programs.
“Crust” button
You use this button to determine whether you want a light, medium or dark crust. For recipes you
try out for the first time, we advise you to choose the medium crust colour.
“Loaf ” button
You use this button to select the weight of the bread you wish to make, either 750 or 1000 gr. Do
bear in mind that the added sum of the ingredients listed in the recipe is the weight of the bread
you are about to make.
“Start” & “stop” button
This button enables you to start and stop the program. If you have accidentally selected the wrong
program, you can change your selection by pressing down the “stop” button for a few seconds, after
which you can reprogram your appliance, selecting the right baking type.
“Start”:
to start a program, press this button until you hear a short bleep. The colon in the time
indication on your display will start flashing, the machine will start the countdown and activate the
program you have selected.
“Stop”:
in order to stop the program, please press this button for a few seconds until you hear a
bleep. The signal confirms the program has ceased.
ON/OFF
How can you tell whether the machine is working and the program is actually running? If the colon on
the display flashes, this indicates that the program is active. If the colon is lit constantly and no longer
flashes, the programme has stopped.
Time delay function (TIMER)
These buttons allow you to determine when your bread will be ready. If you press
▲
the total time
will increase 10 minutes with each press. If you press
▼
you will decrease the total baking time with
10 minutes.
39
