03
Power output
：22W＋22W
Frequency response
：
10Hz
～
50kHz
（
-1.5dB
）
THD
：
1%
（
1kHz
）
S/N Ratio
：
87dB A Weighted
Input Sensitivity
：200mV（Integrated）
Input Impedance
：
100k
Ω
Output Impedance
：
4
Ω ，
8
Ω ，16Ω
Power Requirements
： ～
230V 5%
（
50Hz
）
Dimension (WxDxH)
：
430mmX365mmX250mm
Tube Complement
：12AX7 x2、6P3P x2、845 x2、5AR4 x1
Net Weight
：
35kg
Power Consumption
：
320W
Working Condition: Temperature: 0℃～40℃ Moisture: 20%～80%
Storage Condition: Temperature: -20℃～70℃ Moisture: 20%～90%
Note
: Line Magnetic Audio reserves the right to change specifications at any time without
further notice in advance if products are upgraded. Specifications on the manual only show
the specifications of the amplifier you bought.
Specification
Safety precautions
1. Unplug the power cord if you are not going to use the product for an extended period of time.
2. Temperature will become higher after working in long period of time and please keep the unit's ventilation open
and install the amplifier at a well-ventilated place to avoid troubles and fire hazard.
3. Forbidden to operate as unloaded.
4. Forbidden to operate when the output is open or shorted.
5. Do not attempt to service this product yourself. Opening the cover may expose you to dangerous voltage or other
hazards.
6. We are not responsible for any problems caused by checking and opening without permission of our company.
For service, Please contact a qualified service technician.
7. Do not place any objects filled with liquids such as vases or some others on the top or around.
8. Clean only with dry cloth.
9. Please move the amplifier carefully not to drop the unit or be subject to other strong shocks.
10. Unplug the power cord if you are not going to use the product during thunderstorm.
Carefully read and follow the Manual for installation:
1. Do not place the product near heat sources such as radiators, heat registers or other products that produce heat.
2. In order to avoid being overheated please keep the unit’s ventilation open.
3. Do not expose this appliance to rain or moisture.
4. Amplifier should install steadily and make sure all four feet are on the same level.
5. Keep the amplifier in a certain distance so that it can be easily connected.
6. Keep the amplifier in 15CM’s distance to the surrounding walls.
