FRANÇAIS
DEUTSCH
ESP
AÑO
L
IT
ALIANO
ENGLISH
11
Connect other audio equipment to your amplifier
Use a RCA (Cinch) stereo audio cable (red and white plugs) to connect your sources.
1- During installation please always refer to other product’s operation manuals.
2- Please do not insert the power cord into the main socket only if all other sources are well connected.
3- «R» refers to the Right channel while «L» represents the Left channel.
4- Please take the right guidance for connection as wrong connection may cause noise or low grade function.
Do not also fasten signal cables together with other cables just like the power cables to avoid disturbance.
Connection of the power cord
Connect the speaker cables and signal cables first and then plug
the power cord into the power socket. Your amplifier is now ready for
operation.
Audio connection
Connect to
AC 230V / 50HZ
LM-500PA
SPEAKER OUTPUT
INPUT
BALANCE
SELECTOR 2
~220V 50/60Hz 600W
LINE1
LINE2
LINE1
LINE2
Zhuhai LineMagnetic Audio CO.,Ltd
LM-513PA
www.lm-audio.com
0
4 ohm
8 ohm
16 ohm
RCA
SELECTOR 1
T8AL250V
