03
Power output
：
24W
（Class A Single Ended）
Frequency response
：
15Hz
～
35kHz
（
-1.5dB
）
THD
：
1%
（
1kHz
）
S/N Ratio
：
87dB
Input Sensitivity
：
230mV(Integrated) 1000mV (Pre-IN)
Input Impedance
：
100k
Ω
Output Impedance
：
4
Ω ，
8
Ω,1
6
Ω
Power Requirements
： ～
230V 5%
（
50Hz
）
Dimension (WxDxH)
： （ 430 x 430 x 400 ）
mm
Tube Complement
：
12AX7 x2
、
310A x2
、300B x2、845 x2
Net Weight
：
55kg
Power Consumption
：
400W
Working Condition: Temperature: 0℃～40℃ Moisture: 20%～80%
Storage Condition: Temperature: -20℃～70℃ Moisture: 20%～90%
3
Note
: Line Magnetic Audio reserves the right to change specifications at any time without
further notice in advance if products are upgraded. Specifications on the manual only show
the specifications of the amplifier you bought.
Specification
Safety precautions
1. Unplug the powercord if your are not going to use the amplifier for an extended periode of time.
2. The temperature of the amplifier will rise after a working for a long periode of time. Please keep the
amplifier at a well ventilated place and make sure the ventilation openings are not blocked !
3. Forbidden to operate the amplifier when there are no speakers connected !
4. Do not short-cicuit the output terminals !
5. Do not attempt to service the amplifier yourself. Opening the cover will expose you to lethal voltage
and / or other hazards.
6. We are not responsible for any problems caused by checking and opening the amplifier without per-
mission of our company. Please contact a qualified service technician.
7. Do not place any object filled with water around or on top of the amplifier
8. Clean only with a dry cloth.
9. Please move the amplifier carafully,do not drop it or subject it to strong shocks.
10. Unplug the powercord if you are not using the amplifier during a thunderstorm.
Carefully read and follow the Manual for installation:
1. Do not place the amplifier near heat sourches such as radiators and other produts that produce heat.
2. Please keep the amplifiers ventilation openings open to prevent overheating.
3. Do not expose this amplifier to rain or moisture.
4. The amplifier should be installed on a stable surface and make sure the feet are on the same level.
5. Keep the amplifier at a certain distance , so connections can be made easily.
6. Keep the amplifier at 15 cm from surrounding walls for adequate ventilation.