- 6 -
the operating system boots, click on the Start button located at the bottom
left hand corner of the Desktop, select
Settings
and then
Control Panel
.
Find and click on the
SCSI Adapters
. Click
Drivers
and
Add
.
The next window is asking for the location of the driver to be installed. Since
the driver is on the provided floppy disk, insert the floppy in the floppy disk
drive and click
Have Disk.
The next window is asking for the location of the driver. Most floppy disk
drives are configured as [A:]. To verify, click on
Browse
.
The next window verifies that the appropriate file is located on [A:]. Select the
file sil680r and click
Open
. [A:] should appear in the window. Click
OK
.
The next window allows you to select which driver to install. Only one driver
should appear in this window. Select
Silion Image Sil 0680 Ultra-133
Medley ATA Raid Controller
and click on
OK
. It is always good to Restart
the computer after an installation.
To install the Medley GUI, use Windows InstallShield by performing the
following:
1. After computer restarts, insert floppy disk in floppy disk drive.
2. Double-click on My Computer.
3. Double-click on 3 1/2 Floppy [A:].
4. Double-click on InstallSiIConfig.exe.
5. Follow on-screen instructions to complete installation. Note: Do NOT
install Medley in the Start Up folder. Choose the Default folder (normally
Accessories or Administrative Tools or something similar).
Windows 98/Me Operating System
With the board newly installed, as Windows 98/Me boots, the New Device
will be detected and the Add New Hardware Wizard window will appear.
Follow the instructions in each window, using the driver installation files
(PnP680r.mpd or PnP649r.mpd) on the provided floppy disk as necessary.
1. Select
specify the location of the driver [Advanced]
click
next
.
2. Select
search for the best driver for your device [Recommend]
. Specify
a location. Insert floppy disk into the floppy disk drive and click
Browse
.
3. Choose A: click
ok
and then
next
.
4. Click
next
and then
Finish
.
To install the Medley GUI, use Windows InstallShield by performing the
following:
