User Manual
English
Introduction
Thank you for purchasing the USB 3.0 Type A & C to HDMI & VGA Converter. This product has been
designed to provide trouble free, reliable operation. It benefits from both a LINDY 2
year warranty and free
lifetime technical support. To ensure correct use, please read this manual carefully and retain it for future
reference.
The Lindy USB 3.0 Type A & C to HDMI & VGA Converter allows users to display 4K and/or Full HD 1080p
video and graphics on your TV, monitor or projector via a computer's USB 3.0 Type A or Type C port. It is
the ideal solution for computers, which do not support MST and require several video outputs.
Perfect for connecting a display to USB 3.0 Type A or C equipped computers, this converter is a simple,
high performance alternative to installing a traditional graphics card. It can be used as a primary, mirrored
or extended desktop and it also supports audio transmission via HDMI.
Package Contents
•
USB 3.0 to HDMI & VGA Converter
•
This manual
Features
•
Connects a PC/notebook/Macbook with USB 3.0 A or C interface to one or 2 additional displays via
HDMI and/or VGA interface
•
Software-based Silicon solution (SM768GX) to connect any display to any computer that supports USB
•
Supports resolutions up to 3840x2160@60Hz (HDMI) and/or 1080p@60Hz (VGA)
•
Supports mirror, extended and primary display modes
•
SuperSpeed USB 3.0 delivers higher resolution and performance for video and 3D graphics
•
Equipped with USB to HDMI audio device to transfer audio from PC to monitor or TV
•
Supported Audio: Stereo, 5.1 Multi-Channel, LPCM 16bit, 32/44.1/48KHz
Installation & Operation
To begin using the USB 3.0 Type A & C to HDMI & VGA Converter simply connect the USB connector
Type A or C to the corresponding USB port of your computer. Any required drivers will be automatically
downloaded from the internet.
For Mac computers and those, which have no internet connection, please download the drivers from the
Lindy webshop. They can be found under the corresponding No. 43354. Simply install the driver and
then connect the converter to the computer.
Finally connect the HDMI socket and/or VGA socket of the converter to the HDMI/VGA port of your
monitor or projector using appropriate male to male cables (not included).
