Cat.5 KVM Extender Classic DVI USB Audio
User Manual
English
Benutzerhandbuch
Deutsch
Manuale d’uso
Italiano
Manuel d’utilisateur
Français
LINDY No. 39377
www.lindy.com
© LINDY ELECTRONICS LIMITED & LINDY-ELEKTRONIK GMBH - FIRST EDITION (April 2014)
Tested to Comply with FCC Standards
For Home and Office Use!
Overview
English
Thank you for purchasing the LINDY KVM Extender Classic. It allows you
to control your PC from a keyboard, mouse and monitor at a resolution of
1920x1200 at distances of up to 50m (150 feet) using two inexpensive
UTP CAT5e or higher cables. It supports DVI signals including audio and
HDCP as well as HDMI signals including Full HD 1080p and 3D 1080p24
BluRay.
The KVM Extender Classic consists of a Transmitter unit to be installed
near the computer and a Receiver unit to be installed near the user
console. The Receiver unit connects to a keyboard, monitor and mouse
and offers a USB connection as well as Audio ports via an integrated
USB to Audio converter.
Features
English
•
Provides a real-time convenient method of remotely locating PCs
•
Supports USB devices as well as keyboard and mouse signals
•
High-resolution video support up to 1920x1200 for up to 50m
•
DVI-D and HDMI support including Audio, HDCP and 3D
•
USB Full Speed support up to 12 Mbit/s.
•
Easy, user-friendly installation - no software required
Packaging Contents
English
•
Local Transmitter and Remote Receiver unit
•
5V DC Power Adapter (for Receiver unit, with multi country adapters
for EUR, UK, US and AUS/China)
•
1x USB to DC cable (for Transmitter)
•
1x DVI-D cable
•
1x USB A/B cable
•
This manual
Installation and Use
English
For connecting the local and remote units Category 5e/6 UTP cable
provides the best results. Using shielded STP/FTP cable may result in a
degraded video signal and heavily reduced transmission distances!
Do NOT use a LAN/Ethernet connection. You must always use a
dedicated direct cable! Adding any additional connections in-between
like wall outlets etc. will result in reduced distances!
If you intend to use a distance of more than 25m please first test your
RJ45 cables in a test installation with the extender BEFORE you
install them in your wall or cable channels!
1.
Transmitter Unit
Connect the two CAT5e/6 RJ45 cables to the RJ45 ports.
Connect the USB to DC cable to the Transmitter’s power socket and an
available USB port at your computer. Alternatively a USB power supply i.e.
LINDY NO.73350/73355 (not included) may be used.
Connect the DVI-D and the USB 2.0 A/B cables to your computer.
2.
Receiver Unit
Connect the two CAT5e/6 RJ45 cables to the RJ45 ports making sure not
to mix ports A and B.
Connect the Receiver’s power supply.
Then connect your keyboard, mouse and monitor to the ports labelled
accordingly.
You may also connect your audio and further USB 2.0 devices. A USB 2.0
Hub is supported to connect more than one device.
Now switch your monitor and the computer on. The POWER LEDs on
Transmitter and Receiver should be ON.
The LINK LEDs also should be ON as soon as the RJ45 and the DVI
cables are connected regardless if a picture is displayed or not. If any of
the LEDs are not lit please check the power and RJ45 cables. Make sure
the RJ45 cables are not mixed with each other.
If your screen stays black or if your video image is blurred the equalizer
must be tuned to adjust the Extender to the RJ45 cable properties. To do
so please slowly rotate the EQ switch on the back of the receiver through
