User Manual
English
Installation is simple, make sure that all devices are powered off and then connect the cables as shown
in the example installations according to your requirement. Now connect the provided power supply and
power on all devices, the power led on the front panel will illuminate.
The Extractor features two sets of dip switches which all you to configure the device to meet your
requirements please refer to the following tables which cover the Audio Embedding and Audio Extracting
functions:
Audio Embedding (Rear Panel)
Audio Extracting (Front Panel)
* Note
: When HDMI ARC is enabled audio output is only possible via TOSLink. In addition when HDMI
ARC is enabled audio extraction from an HDMI source connected to HDMI In can only be achieved via
the 3.5mm stereo interface.
For installations using multiple HDMI sources, position the Audio Extractor between a HDMI switch and
HDMI display equipment. Installations using multiple HDMI displays require the Audio Extractor to be
positioned before a HDMI splitter.
DIP Switch Position
Description
2-Pin
PIN#1
ON [
]
Enable Audio Embedder Function
OFF [
]
Disable Audio Embedder Function
PIN#2
ON [
]
Audio Embedding from Toslink
OFF [
]
Audio Embedding from 3.5mm
DIP Switch Position
Description
4-Pin
PIN#1
ON [
]
Enable Audio Extractor Function (via Toslink & 3.5mm)
OFF [
]
Disable Audio Extractor Function
PIN#2
ON [
]
Enable ARC Function
*See Note
OFF [
]
Disable ARC Function
PIN#3
ON [
]
No Function
OFF [
]
No Function
PIN#4
ON [
]
Firmware Update Mode
OFF [
]
Normal Mode
