Manual
English
Notes on using DVI-D equipped devices:
To connect devices equipped with DVI-D
connections, you can use either modular DVI-D/HDMI adapters or DVI-D/HDMI adapter
cables. Be aware that DVI-D is a ‘video only’ interface; audio signals are not supported
when using DVI-D source devices. Also, please note that DVI-D equipped displays must
support HDCP signal decoding to display HDCP protected HDMI signals. HDCP
compatible displays will normally feature the
HD Ready
logo.
Connect the high definition display to the HDMI splitter’s output port and the audio out ports to
an amp or speakers.
When all the connections are made, connect the power supply and switch on.
1. Audio Switch: This switch allows you to select the audio EDID.
•
TV
: HDMI audio output supports LPCM 7.1
•
Bitstream
: Both the HDMI and optical outputs support Dolby 5.1
•
2CH LPCM
: All audio outputs active
2. Power Button: This powers your device on or puts it in stand-by mode
1
2
Power LED:
The LED will illuminate blue
when the power is connected. When there
is no power the LED will turn off
LINK LED:
The LED will blink when the
power is connected. The LED will illuminate
green when the source and display are in
sync
Summary of Contents for 38090
Page 2: ......
