User Manual
English
Product Diagram & Installation
35403
VGA In: Connect to a VGA source device.
Audio In: Connect to a an audio input devices.
VGA Out: Connect to a local VGA display.
Audio Out: Connect to a local audio output device using 3.5mm cable.
Cat.6 Out 1 / 2 / 3 / 4: Connect to 4 separate receivers using Cat.6 or above network cable.
12VDC:
Connect to the included power supply.
35404
VGA Out: Connect to a local VGA display.
Audio Out: Connect to a local audio output device using 3.5mm cable.
Cat.6 In: Connect to the VGA splitter using Cat.6 or above network cable.
EQ: Control and adjust the sharpness of the video output.
Gain: Control and adjust the brightness of the video output.
12VDC In: Connect to the included power supply.
For the installation please follow the steps below:
1. Connect a VGA display or projector to 1 or both VGA Output connections of the receiver.
2. Connect audio output devices to the receiver using 3.5mm audio cable.
3. Connect a Cat.6 or above network cable to the Cat.6 In port of the receiver.
4. Connect the opposing end of the Cat.6 cable to one of the 4 Cat.6 Out ports of the splitter.
5. For local VGA distribution, connect a VGA display and 3.5mm audio output to the VGA Out and 3.5mm
Out ports on the splitter.
6. Connect a VGA and 3.5mm audio source to the VGA and 3.5mm In ports of the transmitter.
7. Connect the included Multi-country PSU to the DC power jack of both the receiver and transmitter, and
plug into a mains power socket.
8. Switch on all connected devices.
Adjusting the Gain & Peak Settings
Use the two dials on the remote units labelled “EQ” and “Peak” to adjust the sharpness or brightness
respectively, to meet the users requirements.
Receiver
Summary of Contents for 35403
Page 2: ......
