English Manual
English 13
Syslog
Syslog messages are simple text messages transmitted to a syslog server using UDP. Linux OS
regularly have a syslog daemon installed, e.g. syslog-ng. For Windows there are some freeware
tools available. On following events,
LINDY IPower Control
will send a syslog message:
•
Booting up
•
Activation/deactivation of syslog
•
Switching of Power Ports
Please find more information about configuration of Syslog in on page 11.
Operation
Switching by using the push buttons
LINDY IPower Control
4x DIN
disposes of two
buttons: “select” and “ok”. By pushing “select”, the
LED of Power Port 1 starts blinking which means
that it is selected. By pushing the button again, the
next Power Port is selected. If you want to change
the switching state of the selected Power Port, push
the “ok” button for two seconds.
You can check the status of the Power Ports by the color of the Power Port status LED
(green=enabled/red=disabled).
Switching by Webinterface
Go to the website of
LINDY IPower Control
. By
entering the IP address of
LINDY IPower Control
into
the address line of your internet browser: http://”IP
address of
LINDY IPower Control
”/ and press LOGIN
Switching
The ports can be switched directly on this page. You
can check the status of the Power Ports by the color of
the Power Port status LED
(green=enabled/red=disabled).