User Manual
English
2
Introduction
Thank you for purchasing the LINDY VGA Auto Switch! With our highly reliable and quality
product, you can enjoy the benefits of automatic switching between VGA inputs or use the
supplied remote control.
Package Contents
LINDY VGA Auto Switch
Remote Control
This manual
Features
Switches two VGA sources to one monitor display
Supports high VGA resolution: 2048 x 1536
Supports monitor type detection via DDC2B signal for each port
Supports VGA, XGA, SVGA, Multi-sync, CRT and TFT-LCD monitors
Remote control for extended manual selection
Auto switching to newly connected VGA equipment (Auto Detect & Select)
Power-free, electronic design to protect monitor and VGA port
Auto scan function (scan rate: 10 sec., 20 sec., OFF)
LED status to indicate the selected VGA channel
Installation and Operation
When using the Auto Switch for the
first time,
please connect the video monitor and VGA signal
sources (from PC, Notebook, or other standard VGA output) to the corresponding ports of the
Auto Switch.
Once the Auto Switch detects a VGA signal, the LED display on the selector panel will
illuminate to indicate the selected channel.
Please use high quality VGA cables to ensure best image quality, we recommend our range
of premium VGA extension cables (HD-15 M / HD-15 F) which are available from
www.lindy.com
Channel selection methods:
Front panel push button: Push this button to switch
channels (If there is only one
channel activated, this button will be inactive).
External control button: This function is the same as the front push button.
Auto switching: The selector will auto detect a new input signal and switch to that
signal. If one signal source is unplugged, the Auto Switch will switch to the available
channel.
Auto Scan: Below the push button is a small dip switch. There
are three options representing
different scan modes (Scan rate 10 sec, Stop scan, and Scan rate 20 sec). Use this dip
switch to choose your scanning preference.
