English Manual
English 3
Port LED
These
green
indicators illuminate steadily when a port is connected to a station successfully, If
this green indicator is blinking, it indicates that a port is transmitting or receiving data on the
network.
2.2 Back Panel Features
The network ports and the power port are located on the back panel of the switch.
Ports
These ports are connection points for PCs and other network devices, such as additional
switches.
Power
The power port is where you will connect the included power adapter.
2.3 Connecting Network Devices
To connect network devices to the Switch, follow these instructions.
1. Make sure all the devices you will connect to the Switch are power off.
2. Connect a Category 5/5e Ethernet network cable to one of the numbered ports on the
Switch.
Note: Use Category 5e Ethernet network cables for your Gigabit connections.
3. Connect the other end to a PC or other network devices.
4. Repeat steps 2 and 3 to connect additional devices.
5. Connect the supplied power adapter to the power port on the Switch’s back panel.
Note: Make sure you use the power adapter apply to the Switch, using a different
power adapter may damage the Switch.
6. Plug the other end of the adapter into an electrical outlet.
7. Power on the devices connected to the Switch. Each active port corresponding LED will
light up on the Switch.
