English Manual
English 17
VLAN 1 unless its PVID has been changed to something other than 1.
Outgoing packets are tagged unless the packet’s VLAN ID is the same as
the PVID. When the
PVID is set to “None,” all outgoing packets are tagged.
※
Note:
If you select “Tagged Only” mode for a port, we recommend setting
the PVID to “None” as the standard configuration.
Aggregation
Port trunk allows multiple links to be bundled together and act as a single
physical link for increased throughput. It provides load balancing, and
redundancy of links in a switched inter-network. Actually, the link does not
have an inherent total bandwidth equal to the sum of its component physical
links. Traffic in a trunk is distributed across an individual link within the trunk in
a deterministic method that called a hash algorithm. The hash algorithm
automatically applies load balancing to the ports in the trunk. A port failure
within the trunk group causes the network traffic to be directed to the
remaining ports. Load balancing is maintained whenever a link in a trunk is
lost or returned to service.
Aggregation / Trunking Configuration
To assign a port to a trunk, click the required trunk number, then click Apply.
Figure 1-6