Lindy 20789, Manual

Page: 15 / 60

- 15 -
could be re-read after the light disappeared. Hold
down the trigger to stop the continuous scanning
Test mode: Hold down the trigger to start testing
continuous scanning the barcode hold down the
trigger again to stop the testing
Each time the trigger has been held down, it only
read once it only could be changed to another way
through scan mode to exit.
Continuous recognition/Timeout Off
Scan mode and continuous / key clearance model, as
provided for the Timeout time, in the absence of a
successful scan, exit and turn off the light, once again
press the trigger, to restart scanning.
Timeout time setting mode
Scan continuous reading/Timeout Off” bar code
Scan two hexadecimal digits as a time value from
appendix A
Scan OFF” bar code from appendix A
Scan Set end” bar code to finish the setting
Timeout setting uses seconds as a unit, for example,
0x40 expresses one minute, Timeout value for the
initial 0xB4, around 3 minutes.