Operation
There are 2 modes of function, 2D and 3D, the mouse
will switch to 2D mode by default when switched on.
3D Mode
Within 3D Mode there are two types of operation,
Presentation and Full Time.
To use the Gyro Mouse in Presentation mode, simply
keep the 3D Active Button pressed as you use the
mouse. As soon as you release the 3D Active Button
the mouse will revert to 2D Mode.
To use the Gyro Mouse in Full Time mode double press the 3D Active Button. The mouse will
now remain in 3D mode until you next press the 3D Active Button.
2D Mode
Within 2D Mode there are two types of operation, 800dpi and 1600dpi. To toggle between these
options simply press and hold the left and right mouse keys until the Indicator light flashes blue.
Two flashes indicate that the mouse is in 800dpi mode, four flashes indicate 1600dpi mode.
Gaming Mode
In addition to 2D and 3D operation the Gyro Mouse also has a handy gaming feature which
allows you to keep the cursor steady when double clicking, whilst maintaining quick cursor
response. To enable the gaming mode simply press and hold the right mouse button and scroll
wheel until the Indicator light flashes blue four times. To return to standard mode press and hold
the right mouse button and scroll wheel until the Indicator light flashes blue twice.
Trouble Shooting
The indicator light is flashing red -
The batteries in your Gyro Mouse are almost flat and need
replacing. Switch the mouse off and exchange the batteries.
The mouse is not working –
Power off the mouse, remove the battery cap and check that the
batteries are inserted correctly. Now power on the mouse, and hold the Connect button whilst
holding the mouse within 15cm of the USB RF Dongle. The Indicator Light on the front of the
mouse will flash blue 4 times to confirm that a connection has been made.
The cursor is drifting –
Check whether the Indicator Light is flashing Red, if so please change
the batteries. Alternatively, press the 3D Active button once to disable the gyro, and then place
the mouse on a steady surface for 2 seconds before re-enabling 3D mode.
2D / 3D mode not working –
Power off the mouse, and then hold the 3D Active button whilst
powering the mouse on until the Indicator Light stops flashing. The mouse is now reset and
should function correctly.