Barrier Systems by Lindsay
+1 (888) 800-3691 (U.S. toll free or +1 (402) 829-6800 - ECN 60881
13
ARMORGUARD® BARRIER
Periodic Maintenance
The ArmorGuard Barrier System has been designed to
minimize the need for periodic maintenance. The only
periodic maintenance items that need to be addressed are as
follows:
•
Apply grease (Chevron EP NLGI 2 grease or equivalent) to
the zerk fittings on the caster wheels at least annually.
General Inspection and Maintenance
Drive-by Inspection
Drive-by type inspections should be performed at least
monthly. The purpose of the drive-by inspection is to
observe for the following characteristics:
•
Any evidence of vehicle impacts.
•
Structural damage.
•
Loose or out of place components.
•
Excessive debris build-up that would not allow the
system to be operated.
If any of these conditions are observed, a walk-up inspection
is required.
Walk-up Inspections
Walk-up inspections should be conducted at least annually
and whenever deemed appropriate from a drive-by
inspection. A walk-up inspection should consist of the
following items:
•
Structural components – Conduct an inspection of all
structural assemblies to ensure that all components are
structurally sound, properly connected and there are no
loose fasteners or damaged components. The hinge pins
should be in position and free to move and the hinge
covers properly fitted and connected. Any components
observed to be nonconforming to the manufacturer’s
drawings should be replaced or repaired.
•
Operating systems – Raise, hold, and lower the system
in accordance with the operating instructions and
ensure that the hinge covers, hinge pins, casters and
other functional components operate in the proper
manner. Any components observed to be deficient
should be repaired or replaced in accordance with the
manufacturer’s instructions.
•
General cleaning – The area around and within the
internal and external operating area should be kept free
of debris that could affect either the impact performance
or restrict the ability to open or close the system when
needed.
For additional information regarding this product, please
contact:
Lindsay Transportation Solutions
Sales and Service, Inc.
180 River Road
Rio Vista, CA 94571
U.S. Toll Free (888) 800-3691
Phone: (402) 829-6800
Fax: (707) 374-6801