COOLING AND DISPENSING SYSTEMS
8
10.
Take off the fan cover (No. 6)
11.
Unscrew the fastening screws from the cooler on the side
where the condenser is placed. (picture 3.1 and 3.2.)
12.
First, pull out the loosen cover about 3 cm in a upward
direction (picture 4.1.), then pull to the side (pic. 4.2). Loosen
the other side of the cover so you can pull out the whole
cover from the metal slides.
13.
Now you can clean the condenser by brushing or by the air
pressure from both sides.
Periodic checks:
• check, if the power supply plug is firmly plugged into the socket
• check that the machine is not exposed to radiant heat
• check the level and cleanliness of the water bath in the plastic container (No.11) (after
six months of operation we recommend to replace the water bath)
• the condenser of the cooling unit should be cleaned regularly
• sanitizing
DO NOT FORGET:
When sanitizing do not forget to also sanitize the dispensing tap and the dispense head.
You need to disassemble them, then soak in a chemical solution and clean thoroughly
to remove any residue left by the beer.
3.1.
3.2.
condenser
4.2. direction of pulling
4.1. direction of pulling
fan cover
