Linden L7DSCD17, Instruction Manual, Page: 13 / 22

12
Remote Control
The remote control transmits a directional
infrared beam. Be sure to aim the remote
control directly at the infrared remote sensor
during operation. The sensor may not be
able to receive signals properly if the sensor
is covered, if there is a large object between
the remote control and the sensor, or if it is
exposed to direct sunlight or a strong case,
change the direction of the light or reposition
the unit to avoid direct lighting.
Refer to the diagram. Remove the battery
compartment cover located on the rear of the
remote control. Insert batteries, making sure to
match their polarities (+/-) to the markings on
the inside of the compartment. Replace
the cover.
To use the remote, point it at the remote sensor
of the player. Operate the remote within 15 feet
of the sensor and at an angle of +/- 60 degrees.
Batteries in the remote will last for approximately
1 year. Replace the batteries if the remote
control does not work. Do not mix old with new
batteries, or different types of batteries.
Remove the batteries from the remote if it will not
be used for a long period of time.
Basic set up
2 x AAA batteries
Battery compartment cover