Lindemann Limetree Bridge, Manual

Page: 19 / 40

19
TOP h
EN
FRONT
FUNCTIONAL DESCRIPTION
1. The toggle switch on the front of the network bridge has two func-
tions: push it up briefly to turn the unit on. A second short push will
turn the unit off again. To switch the output mode of the digital outs,
press and hold the switch in the upper position for three seconds.
Note: after turn-on the device will need some time to boot. The unit
is ready for use when the Sample Rate LED is lit. After turn-off the
Power LED will flash until the unit has shut down.
Digital Outputs USB LAN 5V DC
on
Bridge
Limetree
SR Mode
WLAN
WPS
1 2 3
2. Function indicator of the input signal sampling rate.
The color of this LED will change along with input
signal sampling rate.
3. Output mode function indicator: when the LED is dark,
the device is in Mode 1 at 88.2/96 kHz. When lit yellow,
the device is in Mode 2 at 176.4/192 kHz.
Green PCM 44.1/48 kHz
Cyan PCM 88.2/96 kHz
Blue PCM 176.4/192 kHz
White PCM 352.8/384 kHz
Yellow DSD 64
Orange DSD 128
Purple DSD 256
TOP h