Linde Warnprojektor 45, Original Instructions Manual

Page: 18 / 310

4
Operation
Aligning the warning pictogram
LWP_10
2
1

Check that the sealing ring (1) is correctly
positioned. Replace if necessary.
NOTE
The sealing faces and the sealing ring must
not be greased. Missing or defective sealing
rings must be replaced.

Carefully slide up the sleeve (2) and tighten
to 6.0...8.0 Nm to ensure leak tightness.
LWP_11
2
1
3
1 Projector head
2 Socket head screw M6x16 mm
3 Spring lock washer M6 and washer M6
Perform the following steps to vertically align
the projector head (1):

Loosen the screw (2).

Align the projector head in the required
direction.

Tighten the screw to 3.0-4.0 Nm.
14 Operating Instructions – 3008011680 EN – 06/2018