12
257
257
Lindab reserves the right to make changes without prior notice
2021-11-02
UltraLink
®
Monitor
FTMU
lindab | technical information
Display
The display can show
useful information both
with the diode flashing in
green (status light) and
with parameters in the
LCD. If the product is
equipped with Bluetooth,
then the diode will also
flash in blue every three seconds. If a device has been
connected to the UltraLink via Bluetooth, then the diode
will flash in blue every other second.
By short pressing the mode button you can change the
displayed parameter. If the button is pressed for more than
5 seconds (long press) then the configuration menu will be
visible. The arrow at the bottom of the display indicates the
current parameter type and unit.
For a detailed description on configurating the UltraLink
using the mode button on the display,
Parameter structure
The information menu is visible in the display as soon as
the device is powered and by default the air flow in m³/h is
shown. You can toggle between the different parameters in
the menu by short pressing the Mode button. The arrows
at the bottom of the menu indicates the air flow reading,
temperature and also what unit the current value has (if
any). The following list of parameters are available;
• Air flow (m³/h)
• Air flow (l/s)
• Air velocity (m/s)
• Temperature (°C)
• FTMU ID number
Status light
The green status light indicates:
Mode
Function
No light
FTMU is turned off
Flashing light every 1 second
A problem has occurred, error code will be visible in display
Constant light
FTMU is turned on and functioning as normal
The Blue status light indicates:
Mode
Function
No light
Bluetooth is turned off or the FTMU is not equipped with it.
Flashing light every 3 second
Bluetooth is on stand by and is ready to connect to mobile device.
Flashing light every 1 second
A mobile device has been connected to the FTMU.
