31
In the display, the mean speed is shown above the readings.
The air flow is indicated in the upper part of the display as the
average of the results of all mea-surements performed until
now.
Fig. 31: Average value
NOTE!
Select "Print" to print out a report.
• In the Evaluation menu select "Finish mea-surement" (top
of the display) to finish the measurement.
Fig. 32: Finishing the measurement
Fig. 33: Main menu when the readings
have been accepted.
NOTE!
If the airflow reading is not stable or if the resolu-tion is not
high enough, go to the Setup-menu and select Attenuation
> fine (see chapter 6.12)
In the main menu, a tick mark beside the menu "Air flow
(Pitot)" will indicate that the air flow measurement has already
been done.
Select "Print" to print out a report.
