background image

- 2 -

Introduction

Thank you for purchasing a Linda Lewis Kitchens Ltd product. In this
booklet you will find instructions for safe operation so please read
carefully and retain for future reference. The planetary mixers have
a stirring hook that rotates. They have three speed settings and use

a combination transmission composed of a locking band, triangle
belt and chains.

Warnings and Precautions

The following warnings and precautions are important and must be
observed:

 

Never immerse the mixer in water. If the mixer does become

completely wet, it must be dried and checked by a qualified
specialist before it is used again.

 

The mixer cannot be used if the protective cover switch is not
functioning.

 

Prior to installation, please read the instructions fully.

 

Do not put your hand or other items into the bowl when the
machine is in operation.

 

Whenever a speed change is made, the main switch must be
turned off beforehand and then the slow or fast button must

be pressed. This ensures a long service life of the mixer.

 

Do not leave the mixer unattended when it is in operation.

 

Please unplug the electrical cord when the mixer is not in use.

Disclaimer: The manufacturer will accept no liability for any injury
or damage caused by incorrect usage of the mixer.

Technical Data

Specifications:

LLKPM20

Motor Power

1.1kW

Width

500mm

Depth

600mm

Height

780mm

Weight

107kg

Specifications are subject to change. Please check the rating label
on the back of the machine.

Summary of Contents for LLKPM10







Reviews: