Safety
Read and carefully observe these installation
instructions before installing, operating or
troubleshooting the assembly The assembly
must be installed, maintained and repaired
exclusively by persons familiar with the
instructions
Install the assembly only after safety
instructions and this guide have been read
and are completely understood
Adequate personal protection must be
used to prevent splashing of material on the
skin or in the eyes
Always disconnect power source (electric-
ity, air or hydraulic) from the pump when it is
not being used
This equipment generates very high
grease pressure Extreme caution should be
used when operating this equipment as
material leaks from loose or ruptured com-
ponents can inject fluid through the skin and
into the body If any fluid appears to pene-
trate the skin, seek attention from a doctor
immediately
Do not treat injury as a simple cut Tell
attending doctor exactly what type of fluid
was injected
Any other use not in accordance with
instructions will result in loss of claim for
warranty or liability
• Do not misuse, over-pressurize, modify
parts, use incompatible chemicals, fluids,
or use worn and/or damaged parts
• Do not exceed the stated maximum
working pressure of the pump or of the
lowest rated component in your system
• Always read and follow the fluid
manufacturer’s recommendations
regarding fluid compatibility, and the use
of protective clothing and equipment
• Failure to comply may result in death or
serious injury
Explanation of signal
words for safety
NOTE
Emphasizes useful hints and
recommendations as well as
information to prevent property damage
and ensure efficient trouble-free
operation
CAUTION
Indicates a dangerous situation that can
lead to light personal injury if
precautionary measures are ignored
WARNING
Indicates a dangerous situation that
could lead to death or serious injury if
precautionary measures are ignored
DANGER
Indicates a dangerous situation that will
lead to death or serious injury if
precautionary measures are ignored
EC Declaration of
Conformity in
accordance with
Machinery Directive
2006/42/EC, Annex II
Part 1 A
The manufacturer Lincoln Industrial,
5148 North Hanley Road, St Louis, MO
63134 USA hereby declares that the
machine
Designation: Automatic air grease gun
Type: Air operated grease gun
Part number: Model 1162
Year of construction: (see type identifica-
tion plate)
complies with all basic requirements of the
following directives at the time when first
being launched in the market
Machinery directive 2006/42/EC
Applied standards
DIN EN ISO 12100:2011-3,
DIN EN 809-1:2011, DIN EN 4414:-2011-4
In the case of modifications or alterations of
the above mentioned machine not authori-
zed by the manufacturer, validity of this EC
declaration of conformity will cease The
person empowered to assemble the techni-
cal documentation on behalf of the manu-
facturer is the head of standardization; see
EC-representative‘s address
EC-Representative
SKF Lubrication Systems Germany GmbH
Heinrich-Hertz-Str 2-8
DE - 69190 Walldorf
Manufacturer
Lincoln Industrial, 5148 North Hanley Road,
St Louis, MO 63134 USA
Brad Edler,
Manager Product Development/Product Engineering
LPD North America
June 30, 2020
3
