Parking brake
Apply the parking brake whenever
the vehicle is parked. To set the
parking brake, press the parking
brake pedal down until the pedal
stops.
The BRAKE warning lamp in the
instrument cluster illuminates and
remains illuminated (when the
ignition is turned ON) until the
parking brake is released.
Always set the parking brake fully and make sure that the
gearshift is securely latched in P (Park).
The parking brake is not recommended to stop a moving vehicle.
However, if the normal brakes fail, the parking brake can be used to stop
your vehicle in an emergency. Since the parking brake applies only the
rear brakes, the vehicle’s stopping distance will increase greatly and the
handling of your vehicle will be adversely affected.
Push the parking brake pedal
downward again to release the
parking brake. Driving with the
parking brake on will cause the
brakes to wear out quickly and
reduce fuel economy.
Note:
If the vehicle is driven with
the parking brake applied, a chime
will sound.
ADVANCETRAC
姞
WITH ROLL STABILITY CONTROL
姟
(RSC)
STABILITY ENHANCEMENT SYSTEM
The AdvanceTrac
威
with RSC system provides stability enhancement
features such as Roll Stability Control
娂
(RSC), Electronic Stability
Control (ESC) and Traction Control (TCS) for certain driving situations.
The system includes an AdvanceTrac
威
with RSC on/off button, and a
“sliding car” icon in the instrument cluster.
P
!
BRAKE
2007 MKX
(mkx)
Owners Guide (post-2002-fmt)
USA
(fus)
Driving
219
