2 01 9 M K T
14
15
Convenience
SecuriCode
TM
Keyless Entry System
The SecuriCode keypad is near the driver window
and illuminates when touched. The keypad allows
you to lock or unlock the doors without a key. You
can operate the keypad with the factory-set, five-digit
entry code found on the owner’s wallet card in the
glove box or by using your personal code. You must
press each number within five seconds of each other.
To Unlock the Driver Door
Enter the factory-set, five-digit code or your personal
code. The interior lamps light.
To Unlock All Doors
Enter the factory-set code or your personal code,
then press
3·4
within five seconds.
To Lock All Doors
Press and hold
7·8
and
9·0
at the same time (with
the driver door closed). You do not need to enter
the keypad code first.
See the
Doors and Locks
chapter in your
Owner’s Manual
for more information on how to
use SecuriCode.
Universal Garage Door Opener
The driver-side visor has a built-in wireless
transmitter that replaces the common hand-held
garage door opener. This system can also be
programmed to security systems, entry gates and
home or office lighting. Refer to the
Universal
Garage Door Opener
chapter in your
Owner’s
Manual
for programming instructions.
Remote Start
Remote start allows you to start the engine from
outside your vehicle using your key. To start, press
and then press
twice within three seconds.
Before driving your vehicle, you must press the
push button ignition switch on the instrument panel
while applying the brake pedal. You can also turn
your vehicle off from outside after a remote start by
pressing
once.
Daytime Running Lamps
*
The system turns the lamps on in daylight conditions.
To switch the system on, switch the lighting control
to the off, autolamps or parking lamp position.
*if equipped
Power Liftgate
To open remotely, press
twice on your remote control within three
seconds. You can also operate the liftgate by pressing the
button on
the instrument panel.
Power-Adjustable Pedals
The control is on the left side of the steering column. Adjust the pedals
only after stopping your vehicle and placing the transmission in park (P).
Press the arrow
to move the pedals closer to you.
Press the arrow
to move the pedals away from you.
Power Seats
Using the controls on the side of the seat, you can adjust the position
of the seat. You can also use the four-way power lumbar controls* to
adjust the firmness, softness and height of the lumbar control.
Console Refrigerator/Freezer
*
Flip the console lid forward and then remove the cover to open the cooling
compartment. Make sure to replace the cover after using it to help maintain a
more consistent cooling temperature.
To use the refrigerator feature, briefly press and hold the
COOL
control. The
indicator light on the cool side of the control illuminates. The temperature cools to
approximately 41
o
F (5
o
C).
To use the freezer feature, briefly press and hold the
FREEZE
control.
The temperature cools to approximately 23
o
F (-5
o
C).
This feature turns off when you switch the vehicle off. It turns back on to the last
mode when you restart the vehicle. Press the selected control again to switch the
system off.
Note:
We recommend using this feature only when the engine is running to
avoid draining your vehicle’s battery.
*if equipped
Comfort
